New tools


Product no.: ttop_2_1
The Top Marver has a universal mount and can be installed on almost all burners.
Clamping range of the hose clamp: approx. 16 to approx. 21mm - please measure the tube of your burner.
If the tube of your burner is smaller than 16mm or larger than 21mm, please let us know before or after the order. We will deliver you a suitable clamp - WITHOUT ADDITIONAL CHARGE!

Dimensions - s. pictures above

Material - graphite

Would you like this Top Marver without holder for burner? Here: Torch Top Marver without hose clamp, L-shape, model 2

 

34.99 *

In stock, delivery time for Germany days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: ttop_6_1
The Top Marver has a universal mount and can be installed on almost all burners.
Clamping range of the hose clamp: approx. 16 to approx. 21mm - please measure the tube of your burner.
If the tube of your burner is smaller than 16mm or larger than 21mm, please let us know before or after the order. We will deliver you a suitable clamp - WITHOUT ADDITIONAL CHARGE!

Dimensions - 65x50x20mm (s. pictures above)

Material - graphite

Would you like this Top Marver without holder for burner? Here: Torch Top Marver without hose clamp, model 6

 

25.99 *

In stock, delivery time for Germany days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: ttop_6_2

Dimensions - 65x50x20mm (s. pictures above)

Material - graphite

Would you like this Top Marver with holder for burner? Here: Torch Top Marver with hose clamp, model 6

19.99 *

In stock, delivery time for Germany days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_107

Two straight sided lentil with fishbone. The lenses are 25 and 35mm in size and total (both sides together) 12mm deep. Border is 2mm high (per site, total 4mm).

Embossing is ca. 2,5 mm high.

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Horizontal mandrel guides are also possible (no extra charge) - centered or shifted upward (ca. 2/3) - please write us a short message.

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x15mm (per side)

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: tuel_dorn_60_4

Holder: mm, 25cm long.

Further diameters and lengths can be found under the category "Cone mandrel"

Material: stainless steel

 

 

49.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: tuel_drn12_60

Holder: mm, 25cm long.

Further diameters and lengths can be found under the category "Cone mandrel"

Material: stainless steel

 

 

14.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: ring_dorn_60_5

Just as our light ring mandrels, but 60mm long.

Possible diameters: 12, 14, 16, 17, 18, 19, 20mm - please write us a short message to the order which diameter (5 ring mandrels) you would like to have.

Holder: 5mm, 25cm long.

Material: stainless steel

 

 

59.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: ring_dorn_light_60
Just as our light ring mandrels, but 60mm long.
 
Possible diameters: 12, 14, 16, 17, 18, 19, 20mm - please select (selection box above)

Holder: 5mm, 25cm long.

Material: stainless steel

 

 

14.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pl_sl_30_bent

Universal tool. Used for example to create the clean base of an Tops for exchange rings.

The plate is 30x30mm in size, 5mm thick, the slot is 3mm wide - for the mandrels up to 2.4mm.

Material: Plate is made of brass, holder of wood.

19.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pl_sl_30

Universal tool. Used for example to create the clean base of an Tops for exchange rings.

The plate is 30x30mm in size, 5mm thick, the slot is 3mm wide - for the mandrels up to 2.4mm.

Material: Plate is made of brass, holder of wood.

19.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b40g_38
Total 10 donuts, dimensions (see picture above):

7x13mm
8x14mm
9x15mm
10x16mm
6x12mm
6x15mm
8x17mm
10x19mm
12x21mm
14x22mm

Mandrel guide 3,8mm: for up to 3,2mm mandrel. Matching mandrels can be found here.

This bead roller with 6mm mandrel guides can be found here.

Possible mandrel guides (no extra charge!): 2, 5 and 6mm

Material - graphite

Dimensions (LxWxH): 115x30x12mm

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b40g_6
Total 10 donuts, dimensions (see picture above):

7x13mm
8x14mm
9x15mm
10x16mm
6x12mm
6x15mm
8x17mm
10x19mm
12x21mm
14x22mm

Mandrel guide 6mm: for up to 5mm mandrel. Matching mandrels can be found here.

This bead roller with 3,8mm mandrel guides can be found here.

Possible mandrel guides (no extra charge!): 2, 3 and 4mm

Material - graphite

Dimensions (LxWxH): 115x30x12mm

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_5
With this tool you can make biconical beads beads for e.g. earrings, necklaces, etc.
 
Total 9 bicons, dimensions (see picture above):
 
9,5x5mm
11,5mmx6mm
15,5x8mm
18x9mm
9,5x13mm
11x14mm
12x15mm
13x16,5mm
14x18mm

 
Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 115x30x12mm

 

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_3
With this tool you can make biconical beads beads for e.g. earrings.
 
Total 9 bicons, dimensions (see picture above):
 
9,5x5mm
11,5mmx6mm
15,5x8mm
18x9mm
9,5x13mm
11x14mm
12x15mm
13x16,5mm
14x18mm

 
Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 85x40x12mm

 

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_4
With this tool you can make olive-shaped beads for e.g. earrings, necklaces, etc.
 
Total 10 olives, dimensions (see picture above):

5x8mm
6x9mm
7x10mm
8x11mm
9x12mm
10x14mm
11x15mm
12x16mm
13x17,5mm
14x19mm

 
Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 85x40x12mm

 

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_2
With this tool you can make olive-shaped beads for e.g. earrings.
 
Total 10 olives, dimensions (see picture above):

5x8mm
6x9mm
7x10mm
8x11mm
9x12mm
10x14mm
11x15mm
12x16mm
13x17,5mm
14x19mm

 
Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 85x40x12mm

 

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b507g
With this tool you can make thin heart shapes for e.g. earrings.
 
Total 20 forms, dimensions (see picture above):

Side 1:
17x18mm
17x16mm
15x17mm
18x14mm
13x12mm
11x11mm
11x12mm
12x15mm

Side 2:
18x15mm
16x15mm
13x16mm
14x19mm
13x12mm
12x11mm
9x11mm
10x13mm

 
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b506g
With this tool you can make thin pastilles and ellipses for e.g. earrings.
 
Total 20 forms, dimensions (see picture above):

Ellipse:
5x8mm
6x9mm
7x10mm
8x11mm
9x12mm
10x13,5mm
11x14,5mm
12x15,5mm
13x17mm
14x18,5mm

circles:
5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm in size.

The shapes are about 3mm deep.
 
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b62r_3

As the beadroller b62r_2 - but all of the grooves are the same size - about 3.5 mm

Mandrel guide: for up to 3.5 mm mandrel

Material - graphite

Dimensions (LxWxH): 115x30x15mm

Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b1004g

7 shapes with dimensions (also see picture):


1. 8mm wide, 15mm long

2. 8mm wide, 17.5mm long

3. 8mm wide, 19mm long

4. 9mm wide, 20.5mm long

5. 10mm wide, 24.5mm long

6. 11mm wide, 28mm long

7. 12mm wide, 33mm long

 

Mandrel guide: 3mm for mandrels up to 2,4mm

Material - graphite

Other mandrel guides (2mm or 3,8mm) are also possible (no extra charge) - please write us a short message.

Dimensions (LxWxH): 100x40x12mm

29.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b1001_2g

7 shapes with dimensions (also see picture):
 

1. 8mm wide, 12mm long

2. 8mm wide, 14mm long

3. 8mm wide, 20mm long

4. 8mm wide, 22mm long

5. 10mm wide, 28mm long

6. 10mm wide, 34mm long

7. 10mm wide, 36mm long

 

Mandrel guide: 3mm for mandrels up to 2,4mm

Material - graphite

Other mandrel guides (2mm or 3,8mm) are also possible (no extra charge) - please write us a short message.

Dimensions (LxWxH): 100x40x12mm

29.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: wsp_2

This tool clamp was developed by us to position beadpresses, beadrollers and rails with maximum freedom. Thanks to a 3D ballhead, you can define the position of the tool in the room in such a way that the work run with maximum convenience.

169.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b501g_3_3d
Development of our tool b501g - like shapes as b501g, but in 3D version, both heart shapes are rotated by 180 °.
 
With this tool you can make thin leaves and other forms.
 
Total 20 forms.
 
The shapes are approximately 10 to 20mm large and 2.8mm deep.
 
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b501g_2_3d
Development of our tool b501g - like shapes as b501g, but in 3D version.
 
With this tool you can make thin leaves and other forms.
 
Total 20 forms.
 
The shapes are approximately 10 to 20mm large and 2.8mm deep.
 
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
Similar tool, but with 180° rotated heart shapes can be found here: b501g_3_3d
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: Press_79_7w

Three angel wings about  22x19, 26x14 and 26x19mm in size and a total of about 6mm deep.

Horizontal mandrel guide 2mm for mandrels up to 1.6mm.

Matching mandrels can be found here.

Other mandrel guides are also possible (no extra charge) - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: Press_79_7s

Three angel wings about  22x19, 26x14 and 26x19mm in size and a total of about 6mm deep.

Vertikal mandrel guide 2mm for mandrels up to 1.6mm.

Matching mandrels can be found here.

Other mandrel guides are also possible (no extra charge) - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_6w_35

The shape is approximately 35x35mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_6w

The shape is approximately 30x30mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_6s_35

The shape is approximately 35x35mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_6s

The shape is approximately 30x30mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: Press_79_2sk_3

Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep.

One-sided vertikal mandrel guide 3mm for mandrels up to 2.5mm (35mm wing) and 2mm (24mm wing) for mandrels up to 1.6mm.

Matching mandrels can be found here.

Other mandrel guides are also possible (no extra charge) - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: Press_79_2w_3

Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep.

Horizontal mandrel guide 3mm for mandrels up to 2.5mm (35mm wing) and 2mm (24mm wing) for mandrels up to 1.6mm.

Matching mandrels can be found here.

Other mandrel guides are also possible (no extra charge) - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_4s

The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_4w

The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_4s_50

The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_4w_50

The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_5s

The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_5w

The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_5s_50

The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: Press_79_2s_3

Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep.

Vertikal mandrel guide 3mm for mandrels up to 2.5mm (35mm wing) and 2mm (24mm wing) for mandrels up to 1.6mm.

Matching mandrels can be found here.

Other mandrel guides are also possible (no extra charge) - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_5w_50

The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_8s

The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_8w

The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_8s_50

The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_79_8w_50

The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: Press_79_2s_2

Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep.

Vertikal mandrel guide 3mm for mandrels up to 2.5mm (35mm wing) and 2mm (24mm wing) for mandrels up to 1.6mm.

Matching mandrels can be found here.

Other mandrel guides are also possible (no extra charge) - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: Press_79_2sk_2

Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep.

One-sided vertikal mandrel guide 3mm for mandrels up to 2.5mm (35mm wing) and 2mm (24mm wing) for mandrels up to 1.6mm.

Matching mandrels can be found here.

Other mandrel guides are also possible (no extra charge) - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: Press_79_2w_2

Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep.

Horizontal mandrel guide 3mm for mandrels up to 2.5mm (35mm wing) and 2mm (24mm wing) for mandrels up to 1.6mm.

Matching mandrels can be found here.

Other mandrel guides are also possible (no extra charge) - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_106

Bead press with 3 shapes: about 40X20mm, 40x12mm and 40x15 mm in size. These shapes are perfect for creating, for example, Christmas decorations.

Vertical 3mm mandrel guide for mandrels to 2,4mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x15mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_105

Bead press with three balls and three spacers. This press allows, for example, the assembly of a chain - while the balls are placed in the appropriate spacers. The balls are 25, 20 and 15mm in size.

Vertical 3,8mm mandrel guide for mandrels to 3,2mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  80x50x15mm (per side)

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b61gl_7

The discs are 4mm high.

The shapes are 12, 17, 22 and 25mm high, corresponding to 14, 16, 18 and 20mm wide.

This beadroller fits perfectly for the composition of a chain.

Mandrel guide: for up to 3.5 mm mandrel

Material - graphite

Dimensions (LxWxH): 100x40x15mm

Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b61gl_6

The discs are 4mm high.

The shapes are 5, 6, 7, 8, 9 and 10mm high and correspondingly 14, 16, 18, 20, 22, and 24mm wide

This beadroller fits perfectly for the composition of a chain.

Mandrel guide: for up to 3.5 mm mandrel

Material - graphite

Dimensions (LxWxH): 140x30x15mm

Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b61gl_5_2

The discs are 4mm high.

The cones are 11, 12, 13, 14, 15 and 16mm high (slightly higher than the Beadgloller b61gl_5), corresponding to 13, 15, 17, 19, 21 and 23mm wide

This beadroller fits perfectly for the composition of a chain.

Mandrel guide: for up to 3.5 mm mandrel

Material - graphite

Dimensions (LxWxH): 140x30x15mm

Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b61gl_5

The discs are 4mm high.

The cones are 7, 8, 9, 10, 11 and 12mm high (slightly lower than Beadroller b61gl_5_2), corresponding to 11, 13, 15, 17, 19 and 21mm wide.

This beadroller fits perfectly for the composition of a chain.

Mandrel guide: for up to 3.5 mm mandrel

Material - graphite

Dimensions (LxWxH): 140x30x15mm

Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b61gl_4

The discs are 4mm high.

This beadroller fits perfectly for the composition of a chain.

Mandrel guide: for up to 3.5 mm mandrel

Material - graphite

Dimensions (LxWxH): 140x30x15mm

Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_46_2w

The shape is approximately 42x38mm in size and total (both sides together) 10mm deep - like the press press_46w, but with angular edges.

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_46_2s

The shape is approximately 42x38mm in size and total (both sides together) 10mm deep - like the press press_46s, but with angular edges.

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_6s

The shape is approximately 36x31mm in size and total (both sides together) 11mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_6w

The shape is approximately 36x31mm in size and total (both sides together) 11mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_4w

The shape is approximately 36x32mm in size and total (both sides together) 9mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_4s

The shape is approximately 36x32mm in size and total (both sides together) 9mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_5s

The shape is approximately 36x32mm in size and total (both sides together) 10mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_5w

The shape is approximately 36x32mm in size and total (both sides together) 10mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_3w

The shape is approximately 38x35mm in size and total (both sides together) 11mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_3s

The shape is approximately 38x35mm in size and total (both sides together) 11mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_2w

The shape is approximately 36x32mm in size and total (both sides together) 11mm deep. 

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_100_2s

The shape is approximately 36x32mm in size and total (both sides together) 11mm deep. 

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x12mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pwb1

Tool holder with nickel-plated brass handle - perfect for working with thin wires, bead mandrels and tungsten rods. Thanks to the 2 hardened, double-sided collets a clamping range of 0.1 to 3.2mm is possible.

Material - brass, nickel plated.

Scope of delivery - Holder with 2 collets

Length - 90mm, diameter - 9mm

Weight - 25g

4.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Tool holder with nickel-plated brass handle with a tungsten rod, sharp.

Possible size of the tungsten rod: from 1 to 3.2mm - please select the desired size in the selection box when ordering.

Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels.

Material - brass, nickel plated.

Scope of delivery - Holder with 2 collets and a tungsten rod

Length of the holder - 90mm, diameter - 9mm

Tungsten rod is about 85mm long

Weight - about 30g

5.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Tool holder with nickel-plated brass handle with a tungsten rod, stump.

Possible size of the tungsten rod: from 1 to 3.2mm - please select the desired size in the selection box when ordering.

Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels.

Material - brass, nickel plated.

Scope of delivery - Holder with 2 collets and a tungsten rod

Length of the holder - 90mm, diameter - 9mm

Tungsten rod is about 85mm long

Weight - about 30g

5.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Tool holder with nickel-plated brass handle with a tungsten rod, sharp and bent.

Possible size of the tungsten rod: from 2 to 3.2mm - please select the desired size in the selection box when ordering.

Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels.

Material - brass, nickel plated.

Scope of delivery - Holder with 2 collets and a tungsten rod

Length of the holder - 90mm, diameter - 9mm

Tungsten rod is about 85mm long

Weight - about 30g

6.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Tool holder with nickel-plated brass handle with a tungsten rod, stump and bent.

Possible size of the tungsten rod: from 2 to 3.2mm - please select the desired size in the selection box when ordering.

Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels.

Material - brass, nickel plated.

Scope of delivery - Holder with 2 collets and a tungsten rod

Length of the holder - 90mm, diameter - 9mm

Tungsten rod is about 85mm long

Weight - about 30g

6.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pwb1_24_knife

Tool holder with nickel-plated brass handle with a tungsten rod, knife shaped.

Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels.

Material - brass, nickel plated.
Scope of delivery - Holder with 2 collets and a tungsten rod

Length of the holder - 90mm, diameter - 9mm

Tungsten rod is about 85mm long

Weight - about 30g

6.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pwb1_32_knife

Tool holder with nickel-plated brass handle with a tungsten rod, knife shaped.

Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels.

Material - brass, nickel plated.
Scope of delivery - Holder with 2 collets and a tungsten rod

Length of the holder - 90mm, diameter - 9mm

Tungsten rod is about 85mm long

Weight - about 30g

7.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Tungsten rod, sharp - for our tool holder.

Possible size of the tungsten rod: from 1 to 3.2mm - please select the desired size in the selection box when ordering.

Length - ca. 85mm

Scope of delivery - 1 tungsten rod

 

1.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Tungsten rod, stump - for our tool holder.

Possible size of the tungsten rod: from 1 to 3.2mm - please select the desired size in the selection box when ordering.

Length - ca. 85mm

Scope of delivery - 1 tungsten rod

 

1.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Tungsten rod, sharp and bent - for our tool holder.

Possible size of the tungsten rod: from 2 to 3.2mm - please select the desired size in the selection box when ordering.

Length - ca. 85mm

Scope of delivery - 1 tungsten rod

 

2.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Tungsten rod, stump and bent - for our tool holder.

Possible size of the tungsten rod: from 2 to 3.2mm - please select the desired size in the selection box when ordering.

Length - ca. 85mm

Scope of delivery - 1 tungsten rod

 

2.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: tr_knife_24

Tungsten rod, knife shaped, 2,4mm diameter - for our tool holder.

Length - ca. 85mm

Scope of delivery - 1 tungsten rod

 

3.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: tr_knife_32

Tungsten rod, knife shaped, 3,2mm diameter - for our tool holder.

Length - ca. 85mm

Scope of delivery - 1 tungsten rod

 

4.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: tr_dop_24

Tungsten rod, on both sides shaped: sharp and knife-shaped, 2,4mm diameter - for our tool holder.

Length - ca. 80mm

Scope of delivery - 1 tungsten rod

 

4.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: tr_dop_32

Tungsten rod, on both sides shaped: sharp and knife-shaped, 3,2mm diameter - for our tool holder.

Length - ca. 80mm

Scope of delivery - 1 tungsten rod

 

5.49 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: tr_spz_gr_4

Tungsten rod, 4 pieces, sharp shaped - for our tool holder.

Diameter: 1mm, 2mm, 2,4mm and 3,2mm

Length - ca. 85mm

Scope of delivery - 4x tungsten rod

 

9.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: tr_spz_bent_3

Tungsten rod, 3 pieces, sharp, bent - for our tool holder.

Diameter: 2mm, 2,4mm and 3,2mm

Length - ca. 85mm

Scope of delivery - 3x tungsten rod

 

9.49 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b62r_2

Mandrel guide: for up to 3.5 mm mandrel

Material - graphite

Dimensions (LxWxH): 115x30x15mm

Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: ring_dorn_light_x7_ch
 
possible diameters: 
 

11mm

12mm

13mm

14mm

15mm

16mm

16.5mm

17mm

17,5mm

18mm

18,5mm

19mm

20mm

21mm

21,5mm

22mm

Please write us a short message to the order which diameter you would like.

Holder: 5mm, 25cm long.

Material: stainless steel

These mandrels are lighter (only about 60g) as the mandrels with 3 sizes and fit perfectly with our ring rails: 5mm and 10mm

 

65.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_103

The shapes are 13, 16 und 19mm in size.

3,8mm mandrel guide for mandrels to 3,2mm (here).

Other mandrel guides (2mm, 3mm, 5mm, 6mm - no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x15mm (per side)

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

*

Prices include VAT, excluded delivery