New Tools
...................................................................................................................................................................................................................................................................................
New plates with a slot
New flat mandrels - 15 and 20mm
New mashers with plates - sun rays pattern, fine and rough
8 new paddle
Beadroller made of graphite: serie "Thin"
|
Product no.: pd_1030
The paddle is sharpened at the front and can also be used as a knife e.g. to form the grooves in the glass. Handy wooden holder - slightly smaller (90mm) than our usual holder for bead rollers and presses. Because of its small size and weight (only approx. 26g), this paddle is particularly well suited for "on the fly" work. Material - graphite Dimensions paddle (LxWxH): 30x10x2mm |
9.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: pd_1530
The paddle is sharpened at the front and can also be used as a knife e.g. to form the grooves in the glass. Handy wooden holder - slightly smaller (90mm) than our usual holder for bead rollers and presses. Because of its small size and weight (only approx. 28g), this paddle is particularly well suited for "on the fly" work. Material - graphite Dimensions paddle (LxWxH): 30x15x2mm |
9.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b712
The hemispheres are 25, 20, 15 and 10mmmm in size. Material - graphite Dimensions (LxWxH): 160x40x20mm |
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b711
The hemispheres are 40, 35, 30 and 25mm in size. Material - graphite Dimensions (LxWxH): 100x100x40mm |
69.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b716
Material - graphite Dimensions (LxWxH): 100x100x40mm |
69.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_110w
The ammonite is approximately 50mm in size. These form was modeled after a real ammonite (3D scan). Horizontal 3mm mandrel guide for mandrels to 2,4mm (here). Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message. The bead weighs about 40g! Material - graphite Dimensions (LxWxH): 65x50x15mm (per side) |
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_110s
The ammonite is approximately 50mm in size. These form was modeled after a real ammonite (3D scan). Vertikal 3mm mandrel guide for mandrels to 2,4mm (here). Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message. The bead weighs about 40g! Material - graphite Dimensions (LxWxH): 65x50x15mm (per side) |
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_111s
The ammonite is approximately 40mm in size. These form was modeled after a real ammonite (3D scan). Vertikal 3mm mandrel guide for mandrels to 2,4mm (here). Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x15mm (per side) |
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_111w
The ammonite is approximately 40mm in size. These form was modeled after a real ammonite (3D scan). Horizontal 3mm mandrel guide for mandrels to 2,4mm (here). Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x15mm (per side) |
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_112s
Two ammonites - 30 and 20mm. These forms were modeled after a real ammonite (3D scan). Vertikal 2mm mandrel guide for mandrels to 1,6mm (here). Material - graphite Dimensions (LxWxH): 65x40x15mm (per side) |
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_112sk
Two ammonites - 30 and 20mm. These forms were modeled after a real ammonite (3D scan). Vertikal one-sided 3mm mandrel guide for mandrels to 2,4mm (here). Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x15mm (per side) |
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_112w
Two ammonites - 30 and 20mm. These forms were modeled after a real ammonite (3D scan). Horizontal 3mm mandrel guide for mandrels to 2,4mm (here). Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message.. Material - graphite Dimensions (LxWxH): 65x40x15mm (per side) |
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_104s_3
The shapes are approximately 26, 21 and 16mm in size and total 10, 8 and 7mm deep (both sides together). Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 85x40x15mm (per side)
|
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_104w_3
The shapes are approximately 26, 21 and 16mm in size and total 10, 8 and 7mm deep (both sides together). Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 85x40x15mm (per side)
|
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: ttop_2_1
The Top Marver has a universal mount and can be installed on almost all burners.
Clamping range of the hose clamp: approx. 16 to approx. 21mm - please measure the tube of your burner. If the tube of your burner is smaller than 16mm or larger than 21mm, please let us know before or after the order. We will deliver you a suitable clamp - WITHOUT ADDITIONAL CHARGE! Dimensions - s. pictures above Material - graphite Would you like this Top Marver without holder for burner? Here: Torch Top Marver without hose clamp, L-shape, model 2
|
34.99 €
*
In stock, delivery time for Germany days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: ttop_6_1
The Top Marver has a universal mount and can be installed on almost all burners.
Clamping range of the hose clamp: approx. 16 to approx. 21mm - please measure the tube of your burner. If the tube of your burner is smaller than 16mm or larger than 21mm, please let us know before or after the order. We will deliver you a suitable clamp - WITHOUT ADDITIONAL CHARGE! Dimensions - 65x50x20mm (s. pictures above) Material - graphite Would you like this Top Marver without holder for burner? Here: Torch Top Marver without hose clamp, model 6
|
25.99 €
*
In stock, delivery time for Germany days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: ttop_6_2
Dimensions - 65x50x20mm (s. pictures above) Material - graphite Would you like this Top Marver with holder for burner? Here: Torch Top Marver with hose clamp, model 6 |
19.99 €
*
In stock, delivery time for Germany days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
Prices include VAT, excluded delivery