NEW


Display per page
Sort by
Product no.: pd_1030

The paddle is sharpened at the front and can also be used as a knife e.g. to form the grooves in the glass.

Handy wooden holder - slightly smaller (90mm)  than our usual holder for bead rollers and presses.

Because of its small size and weight (only approx. 26g), this paddle is particularly well suited for "on the fly" work.

Material - graphite

Dimensions paddle (LxWxH): 30x10x2mm

9.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pd_1530

The paddle is sharpened at the front and can also be used as a knife e.g. to form the grooves in the glass.

Handy wooden holder - slightly smaller (90mm)  than our usual holder for bead rollers and presses.

Because of its small size and weight (only approx. 28g), this paddle is particularly well suited for "on the fly" work.

Material - graphite

Dimensions paddle (LxWxH): 30x15x2mm

9.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: zst40

 

The pattern of the stamp may be assembled parallel or turned against each other - so you can achieve at transparent glasses totally different effects.

The plates are 30mm large.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: zst40_40

 

The pattern of the stamp may be assembled parallel or turned against each other - so you can achieve at transparent glasses totally different effects.

The plates are 40mm large.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: zst41

 

The pattern of the stamp may be assembled parallel or turned against each other - so you can achieve at transparent glasses totally different effects.

The plates are 30mm large.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: zst41_40

 

The pattern of the stamp may be assembled parallel or turned against each other - so you can achieve at transparent glasses totally different effects.

The plates are 40mm large.

31.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: z2030sl
The plates are 30mm long and 20mm wide.
 
The pliers are approx. 23cm long.
 
The slot is 2mm wide - for the mandrels up to 1.6mm

Material: stainless steel.

 

 

19.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: z3040sl_3
The plates are 40mm long and 30mm wide.
 
The pliers are approx. 23cm long.
 
The slot is 3mm wide - for the mandrels up to 2.4mm

Material: stainless steel.

 

 

21.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: z3040sl_4
The plates are 40mm long and 30mm wide.
 
The pliers are approx. 23cm long.
 
The slot is 4mm wide - for the mandrels up to 3.2mm

Material: stainless steel.

 

 

21.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: z4050sl_4
The plates are 50mm long and 40mm wide.
 
The pliers are approx. 24cm long.
 
The slot is 4mm wide - for the mandrels up to 3.2mm

Material: stainless steel.

 

 

21.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: z4050sl_3
The plates are 50mm long and 40mm wide.
 
The pliers are approx. 24cm long.
 
The slot is 3mm wide - for the mandrels up to 2.4mm

Material: stainless steel.

 

 

21.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b712

The hemispheres are 25, 20, 15 and 10mmmm in size.

Material - graphite

Dimensions (LxWxH):  160x40x20mm

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b711

The hemispheres are 40, 35, 30 and 25mm in size.

Material - graphite

Dimensions (LxWxH):  100x100x40mm

69.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b716

Material - graphite

Dimensions (LxWxH):  100x100x40mm

69.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_110w

The ammonite is approximately 50mm in size.

These form was modeled after a real ammonite (3D scan). 

Horizontal 3mm mandrel guide for mandrels to 2,4mm (here).  Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message.

The bead weighs about 40g!

Material - graphite

Dimensions (LxWxH):  65x50x15mm (per side)

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_110s

The ammonite is approximately 50mm in size.

These form was modeled after a real ammonite (3D scan). 

Vertikal 3mm mandrel guide for mandrels to 2,4mm (here).  Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message.

The bead weighs about 40g!

Material - graphite

Dimensions (LxWxH):  65x50x15mm (per side)

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_111s

The ammonite is approximately 40mm in size.

These form was modeled after a real ammonite (3D scan). 

Vertikal 3mm mandrel guide for mandrels to 2,4mm (here).  Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x15mm (per side)

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_111w

The ammonite is approximately 40mm in size.

These form was modeled after a real ammonite (3D scan). 

Horizontal 3mm mandrel guide for mandrels to 2,4mm (here).  Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x50x15mm (per side)

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_112s

Two ammonites - 30 and 20mm.

These forms were modeled after a real ammonite (3D scan). 

Vertikal 2mm mandrel guide for mandrels to 1,6mm (here)

Material - graphite

Dimensions (LxWxH):  65x40x15mm (per side)

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_112sk

Two ammonites - 30 and 20mm.

These forms were modeled after a real ammonite (3D scan). 

Vertikal one-sided 3mm mandrel guide for mandrels to 2,4mm (here).  Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  65x40x15mm (per side)

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_112w

Two ammonites - 30 and 20mm.

These forms were modeled after a real ammonite (3D scan). 

Horizontal 3mm mandrel guide for mandrels to 2,4mm (here).  Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message.. 

Material - graphite

Dimensions (LxWxH):  65x40x15mm (per side)

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_104s_3

The shapes are approximately 26, 21 and 16mm in size and total 10, 8 and 7mm deep (both sides together).

Vertical 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  85x40x15mm (per side)

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_104w_3

The shapes are approximately 26, 21 and 16mm in size and total 10, 8 and 7mm deep (both sides together).

Horizontal 3mm mandrel guide for mandrels to 2,5mm (here).

Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message.

Material - graphite

Dimensions (LxWxH):  85x40x15mm (per side)

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pg412_10

The cone shape is 40mm long, 30mm wide and max. 10mm deep.

4mm slot for mandrels up to 3.2mm and two rounded slots 10 and 6mm wide.

Material - graphite

Dimensions (LxWxH): 85x40x12mm

27.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pg412_11

The lentil is 36mm tall and 8mm deep.

4mm slot for mandrels up to 3.2mm and two rounded slots 10 and 6mm wide.

Material - graphite

Dimensions (LxWxH): 85x40x12mm

27.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pg501_1

The lentil is 30mm tall and 10mm deep.

Handy wooden holder - slightly smaller (90mm)  than our usual holder for bead rollers and presses.

Because of its small size and weight (only approx. 50g), this paddle is particularly well suited for "on the fly" work.

Material - graphite

Dimensions paddle (LxWxH): 40x30x15mm

13.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pg501_2

The lentil is 28mm tall and 7mm deep.

Handy wooden holder - slightly smaller (90mm)  than our usual holder for bead rollers and presses.

Because of its small size and weight (only approx. 50g), this paddle is particularly well suited for "on the fly" work.

Material - graphite

Dimensions paddle (LxWxH): 40x30x15mm

13.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pg501_2_3

The lentil is 28mm tall and 7mm deep.

The slot is 3mm wide - for the mandrels up to 2.4mm

Handy wooden holder - slightly smaller (90mm)  than our usual holder for bead rollers and presses.

Because of its small size and weight (only approx. 50g), this paddle is particularly well suited for "on the fly" work.

Material - graphite

Dimensions paddle (LxWxH): 40x30x15mm

13.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pg501_2_4

The lentil is 28mm tall and 7mm deep.

The slot is 4mm wide - for the mandrels up to 3,2mm

Handy wooden holder - slightly smaller (90mm)  than our usual holder for bead rollers and presses.

Because of its small size and weight (only approx. 50g), this paddle is particularly well suited for "on the fly" work.

Material - graphite

Dimensions paddle (LxWxH): 40x30x15mm

13.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pg501_3

The tube is 30mm long, 22mm tall and 10mm deep.

Handy wooden holder - slightly smaller (90mm)  than our usual holder for bead rollers and presses.

Because of its small size and weight (only approx. 50g), this paddle is particularly well suited for "on the fly" work.

Material - graphite

Dimensions paddle (LxWxH): 40x30x15mm

13.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pg501_4

The shape is 30mm long, max. 24mm wide and max. 12mm deep.

Handy wooden holder - slightly smaller (90mm)  than our usual holder for bead rollers and presses.

Because of its small size and weight (only approx. 50g), this paddle is particularly well suited for "on the fly" work.

Material - graphite

Dimensions paddle (LxWxH): 40x30x15mm

13.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: fldrn15

 

The flat part is 7cm long

Total length: ca. 25cm

Weight: ca. 22g

Material: stainless steel

 

4.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: fldrn15_2

 

The flat part is 7cm long

Total length: ca. 25cm

Weight (two pieces): ca. 44g

Material: stainless steel

 

7.50 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: fldrn20

 

The flat part is 7cm long

Total length: ca. 25cm

Weight: ca. 24g

Material: stainless steel

 

4.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: fldrn20_2

 

The flat part is 7cm long

Total length: ca. 25cm

Weight (two pieces): ca. 44g

Material: stainless steel

 

7.50 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

*

Prices include VAT, excluded delivery