NEW


Display per page
Sort by
1 - 50 of 95 results
Product no.: pg412_12

Universal molding tool, light and handy 

Material - graphite

Dimensions plate without handle (LxWxH): 65x50x10mm

24.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: wr_1

Stainless steel interchangeable ring for all ring tops with 2.5mm threaded nut.

The ring is 8mm wide and has a 4mm long M2.5 screw.

Thickness of the ring band: 2 mm

Including 2 silicone O-rings.

 

6.99 *

In stock, delivery time for Germany days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: wr_5

Five stainless steel interchangeable rings for all ring tops with 2.5mm threaded nuts

The rings are 8mm wide and have a 4mm long M2.5 screw.

Thickness of the ring band: 2 mm

Including 2 silicone O-rings.

31.99 *

In stock, delivery time for Germany days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_129s

Triangle is approximately 35mm and square is approximately 32mm. 

The shapes are about 7mm deep (finished bead will be about 7mm thick).

3mm mandrel guide for mandrels to 2,4mm (here).  Other mandrel guides (2mm, no extra charge) are also possible - please write us a short message.

The work method of presses of this type is described in our tutorial:

Endfassung_Tutorial_Rahmenperle_bild

(in German language, English version follows)

Material - graphite

Dimensions (LxWxH):  85x50x15mm (per side)

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_11sk

6 drops, one-sided mandrel guide

Same shapes as b324_11sk_3, but with 2mm mandrel guide for mandrels up to 1,6mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 100x40x12mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_11s

6 drops, continuous  mandrel guide

Same shapes as b324_11s_3, but with 2mm mandrel guide for mandrels up to 1,6mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 100x40x12mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_11sk_3

6 drops, one-sided mandrel guide

Same shapes as b324_11sk, but with 3mm mandrel guide for mandrels up to 2,4mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 100x40x12mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_11s_3

6 drops, continuous  mandrel guide

Same shapes as b324_11s, but with 3mm mandrel guide for mandrels up to 2,4mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 100x40x12mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: wsp_3

This tool clamp was developed by us to position beadpresses, beadrollers and rails with maximum freedom. Thanks to a 3D ballhead, you can define the position of the tool in the room in such a way that the work run with maximum convenience.

169.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b717

The cones have the following dimensions:

1. 24mm wide and 16mm deep

2. 20mm wide and 14mm deep

3. 15mm wide and 12mm deep

4. 10mm wide and 10mm deep

Material - graphite

Dimensions (LxWxH):  160x40x20mm

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b718

Material - graphite

Dimensions (LxWxH):  70x70x30mm

49.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b714

The cones have the following dimensions:

1. 40mm wide and 35mm deep

2. 35mm wide and 28mm deep

3. 30mm wide and 25mm deep

4. 25mm wide and 23mm deep

Material - graphite

Dimensions (LxWxH):  100x100x40mm

69.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_3002sk

6 shapes: pyramid, truncated pyramid, cube, cuboid, hexagonal, cube diagonal.

The shapes are approx. 12mm.

With this press you can make smaller pearls for e.g. earrings.

Here you can find this press with continuous mandrel guide

2mm mandrel guide for mandrels to 1,6mm (here)

Material - graphite

Dimensions (LxWxH):  75x50x15mm (per side)

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_3002s

6 shapes: pyramid, truncated pyramid, cube, cuboid, hexagonal, cube diagonal.

The shapes are approx. 12mm.

With this press you can make smaller pearls for e.g. earrings.

Here you can find this press with one-sided mandrel guide

2mm mandrel guide for mandrels to 1,6mm (here)

Material - graphite

Dimensions (LxWxH):  75x50x15mm (per side)

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_7

10 drops.

You can see the dimensions from the picture no. 2.

One-sided mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.

Here you will find this beadroller with a continuous mandrel guide.

Material - graphite

Dimensions (LxWxH): 115x40x12mm

 

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_6

10 drops.

You can see the dimensions from the picture no. 2.

Continuous mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.

Here you will find this beadroller with a one-sided mandrel guide.

Material - graphite

Dimensions (LxWxH): 115x40x12mm

 

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pn_rn_lr

A universal tool for working in the flame.

The grip rings have 26mm outer diameter and 20mm inner diameter.

The tweezers are approx. 25cm long in total and very stable - fits heavy beads (from approx. 20mm size).

You can find a smaller version of these tweezers here.

Material - stainless steel.

Weight - 80 grams.

17.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: pn_rn_sm

A universal tool for working in the flame.

The grip rings have 20mm outer diameter and 14mm inner diameter.

The tweezers are approx. 17 cm long in total and very stable - fits heavy beads (from approx. 14mm size).

You can find a larger version of these tweezers here.

Material - stainless steel.

Weight - 40 grams.

14.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b3247g

7 drops and 6 balls.

You can see the dimensions from the picture no. 2.

Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 115x40x12mm

 

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b603g

Rails are 100 mm long.

The picture No. 2 shows the dimensions and the shapes of the lanes.

Material - graphite

Dimensions (LxWxH):  100x30x30mm

We have designed suitable mandrels for this rail.

For the small rings can also use the beads mandrels.

This video tutorial explains the work with our rails: https://youtu.be/ku8NyuOrORc

 
36.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b501g_4_3d

With this tool you can make thin leaves and other forms.

Total 20 forms.

Continuous Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.

The same tool, but with a one-sided mandrel guide, can be found here.

A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.

Material - graphite

Dimensions (LxWxH): 85x40x12mm

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_3001s

The shapes are approx. 12 to 15mm in size and approx. 5 to 6mm deep (the finished bead is approx. 5 to 6mm thick).

With this press you can make smaller pearls for e.g. earrings.

2mm mandrel guide for mandrels to 1,6mm (here)

Material - graphite

Dimensions (LxWxH):  75x50x15mm (per side)

36.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: press_3001sk

The shapes are approx. 12 to 15mm in size and approx. 5 to 6mm deep (the finished bead is approx. 5 to 6mm thick).

With this press you can make smaller pearls for e.g. earrings.

One-sided 2mm mandrel guide for mandrels to 1,6mm (here)

Material - graphite

Dimensions (LxWxH):  75x50x15mm (per side)

36.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: z_20

These pliers can be used with all our plates with pattern.

Round plates with pattern you can find here.

Square plates with pattern can be found here.

The pliers is about 24cm long and 2cm wide, hole diameter 6mm.

Material - stainless steel.

Weight - 155 grams.

11.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_8_3

7 drops.

Same shapes as b324_8, but with 3mm mandrel guide for mandrels up to 2,4mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 100x40x12mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_8sk_3

7 drops, one-sided mandrel guide

Same shapes as b324_8sk, but with 3mm mandrel guide for mandrels up to 2,4mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 100x40x12mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_9_3

7 shapes.

Same shapes as b324_9, but with 3mm mandrel guide for mandrels up to 2,4mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 100x40x12mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b324_9sk_3

7 shapes, one-sided mandrel guide

Same shapes as b324_9sk, but with 3mm mandrel guide for mandrels up to 2,4mm. Matching mandrels can be found here.

Material - graphite

Dimensions (LxWxH): 100x40x12mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_79_51

The shape is the same as top former rf_79_52, but with ribbed wings.

This tool was primarily developed for thinner butterfly wings.

Matching plates can be found here

Matching mandrels with M2.5 thread can be found here

This video tutorial explains the work with our top shapers for butterflies:

https://www.youtube.com/watch?v=gyWYjbB3WMw&t=0s

The tool is 65x50x12mm in size (LxWxH)

Material - graphite.

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_79_52

The shape is the same as top former rf_79_51, but with smooth wings.

This tool was primarily developed for thinner butterfly wings.

Matching plates can be found here

Matching mandrels with M2.5 thread can be found here

This video tutorial explains the work with our top shapers for butterflies: https://www.youtube.com/watch?v=gyWYjbB3WMw&t=0s

The tool is 65x50x12mm in size (LxWxH)

Material - graphite.

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_79_53

The shape is the same as for top former rf_79_54, but with ribbed wings.

This tool was primarily developed for thinner butterfly wings.

Matching plates can be found here

Matching mandrels with M2.5 thread can be found here

This video tutorial explains the work with our top shapers for butterflies: https://www.youtube.com/watch?v=gyWYjbB3WMw&t=0s

The tool is 65x50x12mm in size (LxWxH)

Material - graphite.

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_79_54

The shape is the same as for top former rf_79_53, but with smooth wings.

This tool was primarily developed for thinner butterfly wings.

Matching plates can be found here

Matching mandrels with M2.5 thread can be found here

This video tutorial explains the work with our top shapers for butterflies: https://www.youtube.com/watch?v=gyWYjbB3WMw&t=0s

The tool is 65x50x12mm in size (LxWxH)

Material - graphite.

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_79_55

The shape is the same as for top former rf_79_56, but with ribbed wings.

This tool was primarily developed for thinner butterfly wings.

Matching plates can be found here

Matching mandrels with M2.5 thread can be found here

Dieses Videotutorial erläutert die Arbeit mit unseren Aufsatzformer: https://www.youtube.com/watch?v=me12DdB1uIA

The tool is 65x50x12mm in size (LxWxH)

Material - graphite.

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_79_56

The shape is the same as for top former rf_79_55, but with smooth wings.

This tool was primarily developed for thinner butterfly wings.

Matching plates can be found here

Matching mandrels with M2.5 thread can be found here

This video tutorial explains the work with our top shapers for butterflies: https://www.youtube.com/watch?v=gyWYjbB3WMw&t=0s

The tool is 65x50x12mm in size (LxWxH)

Material - graphite.

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_79_57

This tool was primarily developed for thinner dragonfly wings. As an addition, we have implemented a Beadroller for the dragonfly body on the tool. It allows you to create not only beautiful dragonfly wings using the corresponding cabachon plate, but also a complete dragonfly.

Matching plates can be found here

Matching mandrels with M2.5 thread can be found here

The tool is 80x50x12mm in size (LxWxH)

Material - graphite.

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_79_58

This tool was primarily developed for thinner dragonfly wings. As an addition, we have implemented a Beadroller for the dragonfly body on the tool. It allows you to create not only beautiful dragonfly wings using the corresponding cabachon plate, but also a complete dragonfly.

Matching plates can be found here

Matching mandrels with M2.5 thread can be found here

The tool is 80x50x12mm in size (LxWxH)
Material - graphite.

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_10_35_ssl

A total of 12 straight sided lentils - from 10 to 35mm in size.

The shapes are ideal for our round cabochon plates:

6 pieces as a set or separately

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x100x20mm in size (LxWxH)

Material - graphite.

39.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_10_35_kug

A total of 6 hemispheres - from 10 to 35mm in size: 10, 15, 20, 25, 30 and 35mm.

The shapes are ideal for our round cabochon plates: 6 pieces as a set or separately

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x40x40mm in size (LxWxH)

Material - graphite.

39.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_10_35_pf

A total of 12 pastilles - from 10 to 35mm in size.

The shapes are ideal for our round cabochon plates: 6 pieces as a set or separately

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x100x20mm in size (LxWxH)

Material - graphite.

39.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_1

A total of 12 shapes on two sides.

The shapes are ideal for our square cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x100x20mm in size (LxWxH)

Material - graphite.

 

39.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_2

A total of 12 shapes on two sides.

The shapes are ideal for our triangular cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x100x20mm in size (LxWxH)

Material - graphite.

 

39.00 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_3

A total of 6 heart shapes on two sides.

The shapes are ideal for our heart-shaped cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x50x20mm in size (LxWxH)

Material - graphite.

 

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_4_5

A total of 10 shapes on two sides.

The shapes are ideal for our oval (elliptical) and lenticular cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x50x20mm in size (LxWxH)

Material - graphite.

 

36.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_6

A total of 6 star shapes on two sides.

The shapes are ideal for our star-shaped cabochon plates.

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x50x20mm in size (LxWxH)

Material - graphite.

 

36.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_7

A total of 6 star shapes on two sides.

The shapes are ideal for our flower-shaped cabochon plates.

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 100x50x20mm in size (LxWxH)

Material - graphite.

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_8

A total of 4 long hearts on two sides.

The shapes are ideal for our flower-shaped cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 65x50x20mm in size (LxWxH)

Material - graphite.

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_9

A total of 6 shapes on two sides.

The shapes are ideal for our semicircular cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 65x50x20mm in size (LxWxH)

Material - graphite.

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_10

A total of 4 shapes.

The shapes are ideal for our wing-shaped cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 85x40x12mm in size (LxWxH)

Material - graphite.

 

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_11

2 shapes, 25 and 30mm

The shapes are ideal for our shell-shaped cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 75x50x15mm in size (LxWxH)

Material - graphite.

 

32.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: rf_cab_pl_12

3 different patterns, a total of 6 shapes on two sides.

The shapes are ideal for our butterfly cabochon plates

This video tutorial explains the work with our top shapers: https://youtu.be/OzNBaRfi4WY

The tool is 65x50x20mm in size (LxWxH)

Material - graphite.

 

36.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

*

Prices include VAT, excluded delivery

1 - 50 of 95 results