Beadliner, model BM3


Beadliner, model BM3

Product no.: bm3

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

89.00


 

Beadliner with inserts, model BM3

Minimum hole beads length 5 mm, maximum - 50mm.

There are included 8 inserts: conical insert, 2x inserts each for pipe diameters from 3 to 5mm (with normal nose) plus flat insert.

Beadliner is about 12cm wide and 12cm high. Material - brass, stainless steel. Handle - plastic, fiber reinforced.

Delivery: beadliner BM3, magazine with 8 inserts and 2 copper tubes (total length approx. 33cm, 4 or 5mm diameter - for a small practice).

 

Instruction:

Prepare the tube:

1. depending on the diameter, cut the tube slightly longer than the length of the beadhole:

- for 5mm pipe diameter - about 4mm

- for 4mm pipe diameter - about 3.5mm

- for 3mm pipe diameter - about 3mm

2. Deburr the end of the tube (for example with our deburrer).

 

How to use the beadliner:

  1. Place the bead with tube between the conical inset and the upper inset in a suitable size

  2. Hold the bead with your fingers and turn the handle so that the top inset presses on the tube. The tube begins to expand

  3. Turn the screw slightly upwards with the top inset and take out the bead.

Turn the bead over and place it back in between the insets

  1. Hold the bead with your fingers and turn the handle so that the top inset presses on the tube. The tube begins to expand

Repeat this point 3-4 times or until the tube is widened how you want it.

You can also use a second, "normal" nose insert instead of conical insert. The tube is thus pressed between two identical inserts.

Important!

The tube may be beaded until the bead can still be turned with your fingers. Otherwise the pearl will burst!

For post-processing (apply the edges of the tube close to the bead), you can use the supplied flat inset. You can also use a plastic or rubber hammer to smooth the edges of the tube.

This process requires a certain sensitivity and exercise. It may happen that by the first time the tube bursts or bead breaks. Just keep trying - and you will be happy about the good results.

Customers who bought this product also bought

*

Prices include VAT, excluded delivery


Browse this category: Beadliner and Accessories