Product no.: press_3001s
The shapes are approx. 12 to 15mm in size and approx. 5 to 6mm deep (the finished bead is approx. 5 to 6mm thick). With this press you can make smaller pearls for e.g. earrings. 2mm mandrel guide for mandrels to 1,6mm (here) Material - graphite Dimensions (LxWxH): 75x50x15mm (per side) |
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: press_3001sk
The shapes are approx. 12 to 15mm in size and approx. 5 to 6mm deep (the finished bead is approx. 5 to 6mm thick). With this press you can make smaller pearls for e.g. earrings. One-sided 2mm mandrel guide for mandrels to 1,6mm (here) Material - graphite Dimensions (LxWxH): 75x50x15mm (per side) |
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: press_3002sk
6 shapes: pyramid, truncated pyramid, cube, cuboid, hexagonal, cube diagonal. The shapes are approx. 12mm. With this press you can make smaller pearls for e.g. earrings. Here you can find this press with continuous mandrel guide 2mm mandrel guide for mandrels to 1,6mm (here) Material - graphite Dimensions (LxWxH): 75x50x15mm (per side) |
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: press_3002s
6 shapes: pyramid, truncated pyramid, cube, cuboid, hexagonal, cube diagonal. The shapes are approx. 12mm. With this press you can make smaller pearls for e.g. earrings. Here you can find this press with one-sided mandrel guide 2mm mandrel guide for mandrels to 1,6mm (here) Material - graphite Dimensions (LxWxH): 75x50x15mm (per side) |
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b501g_2_3d
With this tool you can make thin leaves and other forms.
Total 20 forms.
The shapes are approximately 10 to 20mm large and 2.8mm deep.
Mandrel guide: for mandrels up to 1.2mm. Matching mandrels can be found here.
Similar tool, but with 180° rotated heart shapes can be found here: b501g_3_3d
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
Material - graphite
Dimensions (LxWxH): 85x40x10mm
|
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b501g_3_3d
With this tool you can make thin leaves and other forms. Total 20 forms. One-sided mandrel guide for mandrels up to 1.2mm. Matching mandrels can be found here. The same tool, but with continuous mandrel guide can be found here. A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm. Material - graphite Dimensions (LxWxH): 85x40x12mm |
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b501g
With this tool you can make thin leaves and other forms.
Total 20 forms.
The shapes are approximately 10 to 20mm large and 2.5mm deep.
Mandrel guide: for mandrels up to 1.2mm. Matching mandrels can be found here.
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
Material - graphite
Dimensions (LxWxH): 85x40x10mm
|
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b501g_4_3d
With this tool you can make thin leaves and other forms. Total 20 forms. Continuous Mandrel guide: for mandrels up to 1.2mm. Matching mandrels can be found here. The same tool, but with a one-sided mandrel guide, can be found here. A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm. Material - graphite Dimensions (LxWxH): 85x40x12mm |
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b506g_2
With this tool you can make thin pastilles and ellipses for e.g. earrings.
Total 20 forms
Material - graphite
Dimensions (LxWxH): 80x40x10mm
|
37.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b507g_2
With this tool you can make thin heart shapes for e.g. earrings.
Total 20 forms
Material - graphite
Dimensions (LxWxH): 80x40x10mm
|
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b324_5
With this tool you can make biconical beads for e.g. earrings, necklaces, etc.
Total 9 bicons, dimensions (see picture above):
9,5x5mm
11,5mmx6mm 15,5x8mm 18x9mm 9,5x13mm 11x14mm 12x15mm 13x16,5mm 14x18mm Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
Material - graphite
Dimensions (LxWxH): 115x30x12mm
|
37.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b324_3
With this tool you can make biconical beads for e.g. earrings.
Total 9 bicons, dimensions (see picture above):
9,5x5mm
11,5mmx6mm 15,5x8mm 18x9mm 9,5x13mm 11x14mm 12x15mm 13x16,5mm 14x18mm Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
Material - graphite
Dimensions (LxWxH): 85x40x12mm
|
37.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b324_4
With this tool you can make olive-shaped beads for e.g. earrings, necklaces, etc.
Total 10 olives, dimensions (see picture above):
5x8mm 6x9mm 7x10mm 8x11mm 9x12mm 10x14mm 11x15mm 12x16mm 13x17,5mm 14x19mm Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
Material - graphite
Dimensions (LxWxH): 85x40x12mm
|
37.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b324_2
With this tool you can make olive-shaped beads for e.g. earrings.
Total 10 olives, dimensions (see picture above):
5x8mm 6x9mm 7x10mm 8x11mm 9x12mm 10x14mm 11x15mm 12x16mm 13x17,5mm 14x19mm Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
Material - graphite
Dimensions (LxWxH): 85x40x12mm
|
37.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b507g
With this tool you can make thin heart shapes for e.g. earrings.
Total 20 forms, dimensions (see picture above):
Side 1: Side 2: One-sided mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
Here you can find this bead roller with continuous mandrel guide.
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 80x40x10mm
|
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b506g
With this tool you can make thin pastilles and ellipses for e.g. earrings.
Total 20 forms, dimensions (see picture above):
Ellipse: 5x8mm 6x9mm 7x10mm 8x11mm 9x12mm 10x13,5mm 11x14,5mm 12x15,5mm 13x17mm 14x18,5mm circles: 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm in size. The shapes are about 3mm deep. One-sided mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
Here you can find this bead roller with continuous mandrel guide.
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 80x40x10mm |
37.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b327g
8 balls: : 6, 7, 8, 9, 10, 11, 12 and 14mm mandrel guide 2mm Material - graphite Dimensions (LxWxH): 80x40x12mm |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: b324g
three drops: 10,15, and 18 mm, 5 Ball: 6, 8, 10, 12 and 14mm, mandrel guide 2mm Material - graphite
Dimensions (LxWxH): 80x40x12mm |
37.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: 321
three drops: 10,15, and 18 mm, 5 Ball: 6, 8, 10, 12 and 14mm, mandrel guide 2mm
|
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Product no.: 324
three drops: 10,15, and 18 mm, 5 Ball: 6, 8, 10, 12 and 14mm, mandrel guide 2mm Possible mandrel guides (no extra charge!): 3,8mm |
37.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here a> |
|
Prices include VAT, excluded delivery