Tools for thin glass shapes


Display per page
Sort by
Product no.: b501g_4_3d

With this tool you can make thin leaves and other forms.

Total 20 forms.

Continuous Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.

The same tool, but with a one-sided mandrel guide, can be found here.

A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.

Material - graphite

Dimensions (LxWxH): 85x40x12mm

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b506g_2
With this tool you can make thin pastilles and ellipses for e.g. earrings.
 
Total 20 forms
 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b507g_2
With this tool you can make thin heart shapes for e.g. earrings.
 
Total 20 forms
 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b508g_sk

With this tool you can make oak leaves in three different sizes:

Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

34.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b506g
With this tool you can make thin pastilles and ellipses for e.g. earrings.
 
Total 20 forms, dimensions (see picture above):

Ellipse:
5x8mm
6x9mm
7x10mm
8x11mm
9x12mm
10x13,5mm
11x14,5mm
12x15,5mm
13x17mm
14x18,5mm

circles:
5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm in size.

The shapes are about 3mm deep.
 
One-sided mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
Here you can find this bead roller with continuous mandrel guide.
 
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

35.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b507g
With this tool you can make thin heart shapes for e.g. earrings.
 
Total 20 forms, dimensions (see picture above):

Side 1:
17x18mm
17x16mm
15x17mm
18x14mm
13x12mm
11x11mm
11x12mm
12x15mm

Side 2:
18x15mm
16x15mm
13x16mm
14x19mm
13x12mm
12x11mm
9x11mm
10x13mm

One-sided mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
Here you can find this bead roller with continuous mandrel guide.
 
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b501g_2_3d
Development of our tool b501g - like shapes as b501g, but in 3D version.
 
With this tool you can make thin leaves and other forms.
 
Total 20 forms.
 
The shapes are approximately 10 to 20mm large and 2.8mm deep.
 
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
Similar tool, but with 180° rotated heart shapes can be found here: b501g_3_3d
 
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b501g_3_3d

Development of our tool b501g - like shapes as b501g, but in 3D version, both heart shapes are rotated by 180 °.

With this tool you can make thin leaves and other forms.

Total 20 forms.

One-sided mandrel guide for mandrels up to 1mm. Matching mandrels can be found here.

The same tool, but with continuous mandrel guide can be found here.

A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.

Material - graphite

Dimensions (LxWxH): 85x40x12mm

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b501g
With this tool you can make thin leaves and other forms.
 
Similar shapes to b501g_2_3d, but flat design.
 
Total 20 forms.
 
The shapes are approximately 10 to 20mm large and 2.5mm deep.
 
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b502g
With this tool you can make thin leaves and other forms.
 
Total 20 forms.
 
The shapes are approximately 10 to 20mm large and 2.5mm deep.
 
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
 
A stamp made of graphite is supplied with this tool. The diameter of the stamp is about 28mm and the height is about 30mm.
 
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 
Multitool-Tutorial__bild

(in German language, English version follows)

 
Material - graphite

Dimensions (LxWxH): 80x40x10mm

 

39.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b84g_b508g_set_1

This set includes the following tools:

1. Bead roller with acorns in four different sizes (25x22mm, 20x18mm, 15x13mm and 10x9mm), like b84g:

Material - graphite

Dimensions (LxWxH): 100x40x12mm

---------------------------------------

2. Tool for oak leaves in three different sizes (17x8mm, 25x15mm and 30x21mm), like b508g_sk

Material - graphite

Dimensions (LxWxH): 80x40x10mm

59.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

Product no.: b84g_b508g_set_2

This set includes the following tools:

1. Bead roller with acorns in four different sizes (25x22mm, 20x18mm, 15x13mm and 10x9mm), like b84g_sk

Material - graphite

Dimensions (LxWxH): 100x40x12mm

---------------------------------------

2. Tool for oak leaves in three different sizes (17x8mm, 25x15mm and 30x21mm), like wie b508g_sk

Material - graphite

Dimensions (LxWxH): 80x40x10mm

59.99 *

In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here

*

Prices include VAT, excluded delivery