Flat mandrels for bead presses

Flat mandrels for bead presses

 

 

Material - stainless steel

 

 

Important when using flat mandrel:


To coat the flat spines, the release agent "Fusion Bead Release" was used in a thick consistency.
Immerse the flat mandrel in the release agent and allow to air dry. Repeat this process for the second release layer. It is important that the release agent is dried in the air.
By the surface tension of the liquid release agent is in the form of coated mandrel oval rather than square as before. If the release agent was applied so thick that the mandrel does not fit into the guide of the press, you can abrade gently the broad, flat sides slightly.
To warm the flat mandrel keep it a bit behind the flames, otherwise the release agent may jump off.
Then let the flat mandrel slowly glow ahead the flames. The glass should be very soft when applied, so you do not tear the release agent from the mandrel. This risk is significantly higher than with round spikes in flat spikes because of their shape and the thicker release layer. Therefore, one should leave the glass flow, especially in the first layer on the mandrel. Nevertheless, the production of a pearl on the flat spine with a little practice, is not heavier than a normal round mandrel guide.

 

Tutorial:

Flachdorn-Tutorial_170

(in German languageEnglish version follows)


Display per page
Sort by
Product no.: fldrn10_5_3

 

The flat part is 7cm long

Total length: ca. 25cm

Weight (three mandrels): ca. 45g

Material: stainless steel

Suitable leather cords and presses

10.00 *
Product no.: fldrn10_5

 

The flat part is 7cm long

Total length: ca. 25cm

Weight (all 5): ca. 100g

Material: stainless steel

Suitable leather cords and presses

18.00 *
Product no.: fldrn10_2

 

The flat part is 7cm long

Total length: ca. 25cm

Weight (two pieces): ca. 40g

Material: stainless steel

Suitable leather cords and presses

7.50 *
Product no.: fldrn10

 

The flat part is 7cm long

Total length: ca. 25cm

Weight: ca. 20g

Material: stainless steel

Suitable leather cords and presses

4.00 *
Product no.: fldrn5_5

 

The flat part is 7cm long

Total length: ca. 25cm

Weight (all 5): ca. 80g

Material: stainless steel

Suitable leather cords and presses

18.00 *
Product no.: fldrn5_2

 

The flat part is 7cm long

Total length: ca. 25cm

Weight (two pieces): ca. 32g

Material: stainless steel

Suitable leather cords and presses

7.50 *
Product no.: fldrn5

 

The flat part is 7cm long

Total length: ca. 25cm

Weight: ca. 16g

Material: stainless steel

Suitable leather cords and presses

4.00 *
*

Prices include VAT, excluded delivery