New tools
|
Product no.: press_107
Two straight sided lentil with fishbone. The lenses are 25 and 35mm in size and total (both sides together) 12mm deep. Border is 2mm high (per site, total 4mm). Embossing is ca. 2,5 mm high. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Horizontal mandrel guides are also possible (no extra charge) - centered or shifted upward (ca. 2/3) - please write us a short message. Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x15mm (per side)
|
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: tuel_dorn_60_4
Holder: mm, 25cm long. Further diameters and lengths can be found under the category "Cone mandrel" Material: stainless steel
|
49.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: tuel_drn12_60
Holder: mm, 25cm long. Further diameters and lengths can be found under the category "Cone mandrel" Material: stainless steel
|
14.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: ring_dorn_60_5
Just as our light ring mandrels, but 60mm long. Possible diameters: 12, 14, 16, 17, 18, 19, 20mm - please write us a short message to the order which diameter (5 ring mandrels) you would like to have. Holder: 5mm, 25cm long. Material: stainless steel
|
59.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: ring_dorn_light_60
Just as our light ring mandrels, but 60mm long.
Possible diameters: 12, 14, 16, 17, 18, 19, 20mm - please select (selection box above)
Holder: 5mm, 25cm long. Material: stainless steel
|
14.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
Product no.: pl_sl_30_bent
Universal tool. Used for example to create the clean base of an Tops for exchange rings. The plate is 30x30mm in size, 5mm thick, the slot is 3mm wide - for the mandrels up to 2.4mm. Material: Plate is made of brass, holder of wood. |
19.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: pl_sl_30
Universal tool. Used for example to create the clean base of an Tops for exchange rings. The plate is 30x30mm in size, 5mm thick, the slot is 3mm wide - for the mandrels up to 2.4mm. Material: Plate is made of brass, holder of wood. |
19.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b40g_38
Total 10 donuts, dimensions (see picture above):
7x13mm Mandrel guide 3,8mm: for up to 3,2mm mandrel. Matching mandrels can be found here. This bead roller with 6mm mandrel guides can be found here. Possible mandrel guides (no extra charge!): 2, 5 and 6mm Material - graphite Dimensions (LxWxH): 115x30x12mm |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b40g_6
Total 10 donuts, dimensions (see picture above):
7x13mm Mandrel guide 6mm: for up to 5mm mandrel. Matching mandrels can be found here. This bead roller with 3,8mm mandrel guides can be found here. Possible mandrel guides (no extra charge!): 2, 3 and 4mm Material - graphite Dimensions (LxWxH): 115x30x12mm |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b324_5
With this tool you can make biconical beads beads for e.g. earrings, necklaces, etc.
Total 9 bicons, dimensions (see picture above):
9,5x5mm
11,5mmx6mm 15,5x8mm 18x9mm 9,5x13mm 11x14mm 12x15mm 13x16,5mm 14x18mm Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 115x30x12mm
|
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b324_3
With this tool you can make biconical beads beads for e.g. earrings.
Total 9 bicons, dimensions (see picture above):
9,5x5mm
11,5mmx6mm 15,5x8mm 18x9mm 9,5x13mm 11x14mm 12x15mm 13x16,5mm 14x18mm Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 85x40x12mm
|
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b324_4
With this tool you can make olive-shaped beads for e.g. earrings, necklaces, etc.
Total 10 olives, dimensions (see picture above):
5x8mm 6x9mm 7x10mm 8x11mm 9x12mm 10x14mm 11x15mm 12x16mm 13x17,5mm 14x19mm Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 85x40x12mm
|
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b324_2
With this tool you can make olive-shaped beads for e.g. earrings.
Total 10 olives, dimensions (see picture above):
5x8mm 6x9mm 7x10mm 8x11mm 9x12mm 10x14mm 11x15mm 12x16mm 13x17,5mm 14x19mm Mandrel guide 2mm for mandrels up to 1,6mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 85x40x12mm
|
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b507g
With this tool you can make thin heart shapes for e.g. earrings.
Total 20 forms, dimensions (see picture above):
Side 1: Side 2: Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
 (in German language, English version follows)Material - graphite
Dimensions (LxWxH): 80x40x10mm
|
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b506g
With this tool you can make thin pastilles and ellipses for e.g. earrings.
Total 20 forms, dimensions (see picture above):
Ellipse: 5x8mm 6x9mm 7x10mm 8x11mm 9x12mm 10x13,5mm 11x14,5mm 12x15,5mm 13x17mm 14x18,5mm circles: 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm in size. The shapes are about 3mm deep. Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 80x40x10mm
|
35.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b62r_3
As the beadroller b62r_2 - but all of the grooves are the same size - about 3.5 mm Mandrel guide: for up to 3.5 mm mandrel Material - graphite Dimensions (LxWxH): 115x30x15mm Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message. |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b1004g
7 shapes with dimensions (also see picture):
Mandrel guide: 3mm for mandrels up to 2,4mm |
29.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b1001_2g
7 shapes with dimensions (also see picture): 1. 8mm wide, 12mm long 2. 8mm wide, 14mm long 3. 8mm wide, 20mm long 4. 8mm wide, 22mm long 5. 10mm wide, 28mm long 6. 10mm wide, 34mm long 7. 10mm wide, 36mm long
Mandrel guide: 3mm for mandrels up to 2,4mm |
29.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: wsp_2
This tool clamp was developed by us to position beadpresses, beadrollers and rails with maximum freedom. Thanks to a 3D ballhead, you can define the position of the tool in the room in such a way that the work run with maximum convenience. |
169.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b501g_3_3d
Development of our tool b501g - like shapes as b501g, but in 3D version, both heart shapes are rotated by 180 °.
With this tool you can make thin leaves and other forms.
Total 20 forms.
The shapes are approximately 10 to 20mm large and 2.8mm deep.
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 80x40x10mm
|
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b501g_2_3d
With this tool you can make thin leaves and other forms.
Total 20 forms.
The shapes are approximately 10 to 20mm large and 2.8mm deep.
Mandrel guide: for mandrels up to 1mm. Matching mandrels can be found here.
Similar tool, but with 180° rotated heart shapes can be found here: b501g_3_3d
Also other depths and mandrel guides are also possible without extra charge - please write us a short message.
(in German language, English version follows)Material - graphite
Dimensions (LxWxH): 80x40x10mm
|
39.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: Press_79_7w
Three angel wings about 22x19, 26x14 and 26x19mm in size and a total of about 6mm deep. Matching mandrels can be found here. Other mandrel guides are also possible (no extra charge) - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: Press_79_7s
Three angel wings about 22x19, 26x14 and 26x19mm in size and a total of about 6mm deep. Matching mandrels can be found here. Other mandrel guides are also possible (no extra charge) - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_6w_35
The shape is approximately 35x35mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_6w
The shape is approximately 30x30mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_6s_35
The shape is approximately 35x35mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_6s
The shape is approximately 30x30mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: Press_79_2sk_3
Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep. Matching mandrels can be found here. Other mandrel guides are also possible (no extra charge) - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: Press_79_2w_3
Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep. Matching mandrels can be found here. Other mandrel guides are also possible (no extra charge) - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_4s
The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_4w
The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_4s_50
The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_4w_50
The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_5s
The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_5w
The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_5s_50
The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: Press_79_2s_3
Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep. Matching mandrels can be found here. Other mandrel guides are also possible (no extra charge) - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_5w_50
The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_8s
The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_8w
The shape is approximately 45x20mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_8s_50
The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_79_8w_50
The shape is approximately 50x28mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: Press_79_2s_2
Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep. Matching mandrels can be found here. Other mandrel guides are also possible (no extra charge) - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: Press_79_2sk_2
Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep. Matching mandrels can be found here. Other mandrel guides are also possible (no extra charge) - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: Press_79_2w_2
Two angel wings about 35X14 and 24x12 mm in size and a total of about 8 and 6mm deep. Matching mandrels can be found here. Other mandrel guides are also possible (no extra charge) - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_106
Bead press with 3 shapes: about 40X20mm, 40x12mm and 40x15 mm in size. These shapes are perfect for creating, for example, Christmas decorations. Vertical 3mm mandrel guide for mandrels to 2,4mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x15mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_105
Bead press with three balls and three spacers. This press allows, for example, the assembly of a chain - while the balls are placed in the appropriate spacers. The balls are 25, 20 and 15mm in size. Vertical 3,8mm mandrel guide for mandrels to 3,2mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 80x50x15mm (per side) |
34.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b61gl_7
The discs are 4mm high. The shapes are 12, 17, 22 and 25mm high, corresponding to 14, 16, 18 and 20mm wide. This beadroller fits perfectly for the composition of a chain. Mandrel guide: for up to 3.5 mm mandrel Material - graphite Dimensions (LxWxH): 100x40x15mm Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message. |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b61gl_6
The discs are 4mm high. The shapes are 5, 6, 7, 8, 9 and 10mm high and correspondingly 14, 16, 18, 20, 22, and 24mm wide This beadroller fits perfectly for the composition of a chain. Mandrel guide: for up to 3.5 mm mandrel Material - graphite Dimensions (LxWxH): 140x30x15mm Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message. |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b61gl_5_2
The discs are 4mm high. The cones are 11, 12, 13, 14, 15 and 16mm high (slightly higher than the Beadgloller b61gl_5), corresponding to 13, 15, 17, 19, 21 and 23mm wide This beadroller fits perfectly for the composition of a chain. Mandrel guide: for up to 3.5 mm mandrel Material - graphite Dimensions (LxWxH): 140x30x15mm Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message. |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b61gl_5
The discs are 4mm high. The cones are 7, 8, 9, 10, 11 and 12mm high (slightly lower than Beadroller b61gl_5_2), corresponding to 11, 13, 15, 17, 19 and 21mm wide. This beadroller fits perfectly for the composition of a chain. Mandrel guide: for up to 3.5 mm mandrel Material - graphite Dimensions (LxWxH): 140x30x15mm Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message. |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b61gl_4
The discs are 4mm high. This beadroller fits perfectly for the composition of a chain. Mandrel guide: for up to 3.5 mm mandrel Material - graphite Dimensions (LxWxH): 140x30x15mm Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message. |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_46_2w
The shape is approximately 42x38mm in size and total (both sides together) 10mm deep - like the press press_46w, but with angular edges. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_46_2s
The shape is approximately 42x38mm in size and total (both sides together) 10mm deep - like the press press_46s, but with angular edges. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_6s
The shape is approximately 36x31mm in size and total (both sides together) 11mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_6w
The shape is approximately 36x31mm in size and total (both sides together) 11mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_4w
The shape is approximately 36x32mm in size and total (both sides together) 9mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_4s
The shape is approximately 36x32mm in size and total (both sides together) 9mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_5s
The shape is approximately 36x32mm in size and total (both sides together) 10mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_5w
The shape is approximately 36x32mm in size and total (both sides together) 10mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_3w
The shape is approximately 38x35mm in size and total (both sides together) 11mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_3s
The shape is approximately 38x35mm in size and total (both sides together) 11mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_2w
The shape is approximately 36x32mm in size and total (both sides together) 11mm deep. Horizontal 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_100_2s
The shape is approximately 36x32mm in size and total (both sides together) 11mm deep. Vertical 3mm mandrel guide for mandrels to 2,5mm (here). Other mandrel guides (2mm, 3.8mm, no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x40x12mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: pwb1
Tool holder with nickel-plated brass handle - perfect for working with thin wires, bead mandrels and tungsten rods. Thanks to the 2 hardened, double-sided collets a clamping range of 0.1 to 3.2mm is possible. Length - 90mm, diameter - 9mm |
4.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
Tungsten rod with holder, sharp (Diameter: 1mm)Tool holder with nickel-plated brass handle with a tungsten rod, sharp. Possible size of the tungsten rod: from 1 to 3.2mm - please select the desired size in the selection box when ordering. Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels. Length of the holder - 90mm, diameter - 9mm Tungsten rod is about 85mm long |
5.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
Tungsten rod with holder, stump (Diameter: 1mm)Tool holder with nickel-plated brass handle with a tungsten rod, stump. Possible size of the tungsten rod: from 1 to 3.2mm - please select the desired size in the selection box when ordering. Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels. Length of the holder - 90mm, diameter - 9mm Tungsten rod is about 85mm long |
5.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
Tungsten rod with holder, sharp, bent (Diameter: 2mm)Tool holder with nickel-plated brass handle with a tungsten rod, sharp and bent. Possible size of the tungsten rod: from 2 to 3.2mm - please select the desired size in the selection box when ordering. Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels. Length of the holder - 90mm, diameter - 9mm Tungsten rod is about 85mm long |
6.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
Tungsten rod with holder, stump, bent (Diameter: 2mm)Tool holder with nickel-plated brass handle with a tungsten rod, stump and bent. Possible size of the tungsten rod: from 2 to 3.2mm - please select the desired size in the selection box when ordering. Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels. Length of the holder - 90mm, diameter - 9mm Tungsten rod is about 85mm long |
6.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
Product no.: pwb1_24_knife
Tool holder with nickel-plated brass handle with a tungsten rod, knife shaped. Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels. Length of the holder - 90mm, diameter - 9mm Tungsten rod is about 85mm long |
6.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: pwb1_32_knife
Tool holder with nickel-plated brass handle with a tungsten rod, knife shaped. Thanks to the 2 hardened, double-sided collets, the holder has a clamping range of 0.1 to 3.2mm and perfectly suitable for working with thin wires and bead mandrels. Length of the holder - 90mm, diameter - 9mm Tungsten rod is about 85mm long |
7.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
Tungsten rod, sharp - diameter from 1 to 3.2mm (Diameter: 1mm)Tungsten rod, sharp - for our tool holder. Possible size of the tungsten rod: from 1 to 3.2mm - please select the desired size in the selection box when ordering. Length - ca. 85mm Scope of delivery - 1 tungsten rod |
1.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
Tungsten rod, stump - diameter from 1 to 3.2mm (Diameter: 1mm)Tungsten rod, stump - for our tool holder. Possible size of the tungsten rod: from 1 to 3.2mm - please select the desired size in the selection box when ordering. Length - ca. 85mm Scope of delivery - 1 tungsten rod |
1.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
Tungsten rod, sharp, bent - diameter from 2 to 3.2mm (Diameter: 2mm)Tungsten rod, sharp and bent - for our tool holder. Possible size of the tungsten rod: from 2 to 3.2mm - please select the desired size in the selection box when ordering. Length - ca. 85mm Scope of delivery - 1 tungsten rod |
2.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
Tungsten rod, stump, bent - diameter from 2 to 3.2mm (Diameter: 2mm)Tungsten rod, stump and bent - for our tool holder. Possible size of the tungsten rod: from 2 to 3.2mm - please select the desired size in the selection box when ordering. Length - ca. 85mm Scope of delivery - 1 tungsten rod |
2.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
Product no.: tr_knife_24
Tungsten rod, knife shaped, 2,4mm diameter - for our tool holder. Length - ca. 85mm Scope of delivery - 1 tungsten rod |
3.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: tr_knife_32
Tungsten rod, knife shaped, 3,2mm diameter - for our tool holder. Length - ca. 85mm Scope of delivery - 1 tungsten rod |
4.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: tr_dop_24
Tungsten rod, on both sides shaped: sharp and knife-shaped, 2,4mm diameter - for our tool holder. Length - ca. 80mm Scope of delivery - 1 tungsten rod |
4.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: tr_dop_32
Tungsten rod, on both sides shaped: sharp and knife-shaped, 3,2mm diameter - for our tool holder. Length - ca. 80mm Scope of delivery - 1 tungsten rod |
5.49 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: tr_spz_gr_4
Tungsten rod, 4 pieces, sharp shaped - for our tool holder. Diameter: 1mm, 2mm, 2,4mm and 3,2mm Length - ca. 85mm Scope of delivery - 4x tungsten rod |
9.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: tr_spz_bent_3
Tungsten rod, 3 pieces, sharp, bent - for our tool holder. Diameter: 2mm, 2,4mm and 3,2mm Length - ca. 85mm Scope of delivery - 3x tungsten rod |
9.49 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: b62r_2
Mandrel guide: for up to 3.5 mm mandrel Material - graphite Dimensions (LxWxH): 115x30x15mm Other mandrel guides (3mm, 5mm or 6mm) are also possible (no extra charge) - please write us a short message. |
31.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: ring_dorn_light_x7_ch
possible diameters:
11mm 12mm 13mm 14mm 15mm 16mm 16.5mm 17mm 17,5mm 18mm 18,5mm 19mm 20mm 21mm 21,5mm 22mm Please write us a short message to the order which diameter you would like. Holder: 5mm, 25cm long. Material: stainless steel These mandrels are lighter (only about 60g) as the mandrels with 3 sizes and fit perfectly with our ring rails: 5mm and 10mm
|
65.00 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
|
Product no.: press_103
The shapes are 13, 16 und 19mm in size. 3,8mm mandrel guide for mandrels to 3,2mm (here). Other mandrel guides (2mm, 3mm, 5mm, 6mm - no extra charge) are also possible - please write us a short message. Material - graphite Dimensions (LxWxH): 65x50x15mm (per side) |
32.99 €
*
In stock, delivery time for Germany 4 – 6 days. Delivery times for other countries and information on the calculation of the delivery time see here |
|
|
|
Prices include VAT, excluded delivery